Research, Evaluation Equipments and Testing Services for Manufacturing
[Japan]
YAMAMOTO METAL TECHNOS CO., LTD.
Site map Japanese
Top About us News Products R&D Contact
@TOP@„@PRODUCTS@„@GIGA QUAD® LINE UP@„@YRB300L
Products
GIGA QUAD® Line up
YRB200
YRB300L
Corrosion environmental testing unit YRB200-010
High temperature environmental testing unit(Halogen Lamp)
Q&A
Technical information
MULTI INTELLIGENCE®
MIRS®



papers
Products

Dual-spindle rotating bending fatigue testing machine


GIGA QUAD®
Model : YRB300L
YRB300L
YRB300L

YRB300L
Contact

Advantages

High Efficiency
GIGA QUAD® is convenient to get a number of fatigue test data very quickly, because four specimens can be tested simultaneously.
In order to obtain one S-N curve, four specimens can be tested at different stress levels by giving different weights for the respective specimens. Thus, S-N property of a definite material can be obtained within the reasonable short period.
From this point of view, the present machine of GIGA QUAD® has a significant performance of the high efficiency.

eX) Time needed for Giga-Cycle fatigue test data collection for Metal M. highefficiency

Chart Comparison of Single and Dual-Spindle Testing Period highefficiency
Easy operation
In this testing machine, collet nuts and collet chucks are used to fix and remove the specimens.
When the user wants to fix a specimen, the specimen is inserted into the collet chuck as indicated in this figure, and he tightens the collet nut by using a spanner.
And when he wants to remove the specimen, he loosens the collet nut by the spanner, and pull out it by fingers.

About the collet chucks, different inner diameters such as 6mm, 8mm and 10mm are prepared in advance.
Thus, the user can choose the most convenient size of the collet chuck depending on their own requirements.
How to fix , How to remove
Small eccentricity
The advantage is to use high performance collet chuck and nut. Thus, small eccentricity of the specimen after chucking was realized.
Such a small eccentricity is fundamentally important to perform the fatigue tests in rotating bending.
If the eccentricity becomes large, problems of vibration and noise take place in the fatigue tests and, therefore, some extent of error is included in the applied stress.
According to preliminary experiments, no effect of the eccentricity was found for fatigue test data to obtain the S-N property, if the eccentricity is kept within }30ƒΚm.
This is the reason why eccentricity is focused as an important subject as a ROTATING BENDING FATIGUE TESTING MACHINE.
From this point of view, the eccentricity was kept within }30ƒΚm.
One handed type
Plating, heat treatment, thermal spray, shot peening, laser, coatingc.
GIGA QUAD® is suitable for any kind of research and studies for metal fatigue characteristics with surface modification.
Because the effective volume of the specimen in the cantilever bending(One-handed type) is much smaller than that in the uniform bending(both-handed type).
This means that it is small percentage that the specimen is broken by material inner defect in the case of one-handed type.
High weight type
YRB300L is a higher weight model adapted for metal fatigue strength characteristics with high intensity and with heat treatment. It is designed with safety for higher weight.
YRB300L can be loaded to 85kg per one specimen.
Specification (for Japan)

YRB300L : the type of higher weight and underneath motor
       
Spindle  spindle number    2
spindle speed  rpm 500~4000
motor  kW 0.4kW-4P
Capacitance   V 200
Bearing  spindle   Angular contact ball bearing
specimen   Deep groove ball bearing
Collet chuck chuck size mm ƒΣ5~20
Maximum load   kg 85X4
Maximum bending moment   N.mm 52479 (in case of our specimen)
Belt type     V belt A
Size of device  weight kg about 450
size  mm 890X805X1260
Adjust boad of standard type     -
Service life   year 3
Guaranteed term   year 1

¦ It is possible to change the specification for the other country.

¦ Product specifications and appearance may be changed for the improvement. We appriciate your understanding.
Option
       
Name Quantity Outline
Adaptor 4 @ @ weight holding part from ƒΣ5~20mm
Weight 1 @ @ variety pack ¦0.1kg~
Weight Holder 4
Corrosive environmental unit 1 @ @ in case of desire for doing test under
@ @ an adverse corrosive condition
TECHNICAL INFORMATION
>> PageTop



YAMAMOTO METAL TECHNOS CO., LTD.
Rotating Bending Fatigue Testing Machine@[Japan]

4-7, Setoguchi 2-chome, Hirano-ku, 547-0034 Osaka Japan
TEL: 81-6-6704-1800@E-mail: info@yama-kin.co.jp


Top | About us | News | Products | R&D | Contact